|
| |
6515 TDS
for WearMax Universal Primer
Technical Data Sheet
WearMax Universal Primer
Product No.: 6515
General: Waterborne Primer, based on Acrylic and Polyurethane Dispersions, for
newly installed floors. WearMax Universal Primer performs with minimal side
bonding in order to minimize panelisation.
Properties: WearMax Universal Primer 6515 is specially developed to create
excellent adhesion on all wood species. It is formulated to guaranty excellent
sunlight resistance as well as excellent flow. WearMax Universal Primer 6515 is
VOC compliant and water soluble if not cured. WearMax Universal Primer 6515 is
specially developed to avoid side bonding, it sands easily and is smooth by
using 100 grit sandpaper or 120-grit screen.
Spread rate: 350 - 400 sq.ft./ Gal
Dry Time: 1 hr between coats
2 - 3 hrs to buff
Viscosity: 11 - 12 sec. 4 mm DIN Cup
Hazards: Health: 1 slight
Fire: 0
Reactivity: 1 slight
Shelf Life: 12 Months in original unopened Container
Appearance: Slightly milky opaque
VOC: 35.8 gr. / ltr.
Solids: 19.9 %
Page 1of 2
Application: Prepare entire Floor according to NOFMA Standard
Vacuum and tack with a damp towel.
Apply WearMax Universal Primer 6515 with lightweight T-Bar and short nap
applicator sleeve.
Allow dry time of approximately 1 h.
Apply 2nd coat of WearMax Universal Primer 6515.
Allow dry time of 2 - 3 h. (check with moisture meter).
Buff with 120grit screen, or maroon pad with 180 - 240 sandpaper strips, vacuum
and tack with damp towel.
Apply desired WearMax Armor/Top coat.
WearMax Universal Primer 6515 is free of formaldehyde, insecticides/pesticides
and heavy metals (according to EN 71).
Remarks: Trustor Coatings is producing high quality coatings, based on suitable
application methods and technologies. Our proposal is considered as
recommendation only without obligations. Our proposals are based on experience
and latest know-how; they do not release from careful and proper production and
quality control.
For further information see MSDS / Application instructions on label, or call
Trustor Coatings at 715 849 2989.
Page 2 of 2 Revised August 2, 2006
|