6527    TDS for WearMax Professional Shield

Technical Data Sheet

WearMax Professional Shield

Product No.: 6527

General: Waterborne Topcoat, based on Acrylic and Polyurethane Dispersions. WearMax Professional Shield 6527 dries clear and performs with excellent hardness, toughness, build, and stain resistance.

Properties: WearMax Professional Shield 6527 is specially developed to create superior stain and scratch resistance. It guaranties excellent sunlight resistance as well as excellent flow. WearMax Professional Shield 6527 is VOC compliant and water soluble if not cured. WearMax Professional Shield 6527 levels perfectly, dries fast
WearMax Professional Shield 6527 is available in 3 different gloss variations: Commercial (Matte), Satin and Gloss.

Spread rate: 800 – 900 sq.ft. / Gal.

Dry Time: 4 hrs.

Viscosity: 17 – 18 sec. 4 mm DIN Cup

Hazards: Health: 1 slight
Fire: 0
Reactivity: 1 slight

Shelf Life: 12 Months in original unopened Container
(Stir properly before use)

Appearance: Slightly milky opaque

VOC: 90.3 gr/ltr.

Solids: 30.2 %
 

Page 1 of 2

Application: To be applied on WearMax Professional Armor 6525 only.
Do not screen sealed surface.
Mix with attached Catalyst and apply WearMax Professional Shield 6527 with a lightweight T-Bar and short nap applicator sleeve and roll with Trustor Roller applicator immediately.
Surface is ready to walk on after 12 hrs., wearing street shoes.

WearMax Professional Shield 6527 is free of formaldehyde, insecticides/pesticides and heavy metals (according to EN 71).

Remarks: Trustor Coatings is producing high quality coatings, based on suitable application methods and technologies. Our proposal is considered as recommendation only without obligations. Our proposals are based on experience and latest know-how; they do not release from careful and proper production and quality control.

For further information see MSDS / Application instructions on label, or call Trustor Coatings at 715 849 2989.

Page 2 of 2 Revised August 2, 2006