Dramatically
improve the way you remove double-sided tape from body side moldings. Naturally
made from American grown soybeans. BEAN•e•doo®: Molding Adhesive Remover makes
it simple, easy and safe. 100% biodegradable, non-caustic, non-toxic, with no
strong odor, it saves time, money and materials and frees up manpower for other
jobs.
No longer is it necessary to sand and grind the glue off the molding, which
could damage it, making it unusable. Just let the molding soak in the tray for
the necessary time to soften the adhesive - but no longer than over night - then
rinse with plain water. In some instances, a light scraping with a plastic
scraper or scrub pad may be necessary. Actual job-man hours are reduced by over
75%. BEAN-e-doo Molding Adhesive Remover will continue to work effectively for
up to three months, and replacing it costs less than other products that try to
do the same thing.
BEAN-e-doo Molding Adhesive Remover is backed by Franmar's famous "no-hassle"
guarantee. APPLICATION:
Soak molding strips in tray for a few hours, but no longer than
overnight. When adhesive has softened, scrape off with a plastic scraper. Rinse
molding strip thoroughly with water to remove any residue, and they are ready to
be used again.
Caution: Prolonged periods of soaking may soften or remove paint. BEAN-e-doo Molding Adhesive Remover will remove chrome Mylar tape found on body side moldings and will cause rubber moldings to swell. Do not use with very thin moldings.
| • Flash Point: 156°F
(PMcc) (ASTM D93) • pH Level: 6.85 pH of 1/10 wt/wt solution in soft water. • Vapor Pressure: < 2 • Odor: Mild Odor • Conditions to avoid: Strong oxidizing agents. • VOC: 19%. • Packaged: Gallon, 2 1/2 Gallon, 55 Gallon Drum |
Revision Date 11/1/2006