BEAN-e-doo T-Lube Tire and Belt Release Agent
A new revolutionary development for the asphalt paving
industry. BEAN•e•doo T-Lube, developed with 100% American grown soybeans,
prevents asphalt from bonding to rubber and polyurethane surfaces. T-Lube is a
drop in solution for your current working environment that solves the
frustrating problem of asphalt pick up on cold tires or conveyor belts. Unlike
other products, T-Lube does not degrade rubber tires or polyurethane surfaces.
It is safe for workers, 100% biodegradable, does not contribute to global
warming and guaranteed to leave the asphalt where it was intended to stay.
T-Lube is the solution for any paving job!
APPLICATION:
Use in concentrated form to prevent asphalt from bonding to rubber and
polyurethane surfaces. When rubber tires on compactors are cool, spray tire
surface with BEAN-e-doo T-Lube. As tire warms up T-Lube will evaporate. Reapply
as needed. For other uses, spray light coat of T-Lube on the surface to protect
from asphalt bonding. For clean up, spray with water to rinse surface of all
residues.
| • Flash Point: Above
500ËšF • pH Level: 6.65 pH of 1/10 wt/wt solution in soft water. • Vapor Pressure: NA • Odor: Yellow oily liquid. • Conditions to avoid: Strong oxidizing agents, rags soaked with other solvents or chemicals. • Health Hazards: None known • Packaged: Five Gallon, 55 Gallon Drum |
Common Uses Prevent asphalt bonding • Tires • Tracks • Conveyor belts • Hoses • Rubber surfaces |
Revision Date 11/1/2003